Access Flooring Systems: TorLock BSEN
Kingspan's TorLock BSEN access flooring systems are fully tested to the requirements of the European Standard for raised access floors BSEN12825. The design incorporates a unique wrap around construction which makes panel removal and replacement easy whilst also improving panel edge strength.
Its slim design of only 26mm also provides maximum usable void within the confines of a given floor height. The TL3 and TL5 panels are based upon a 600mm module constructed around a high performance chipboard core. The galvanised steel shell comprises a top sheet that is wrapped around and laminated to the core. This is then mechanically stitched to the bottom steel sheet for greater strength and to provide full electrical continuity and static dispersion of the system where required.
The panels are engineered to fine dimensional tolerances for modular control and corner locking to the pedestal head gives rock free solid stability.
Tested in accordance with European Standard BS EN12825 for raised access floors
Finished floor heights from 60mm to 375mm are available using standard pedestals. For heights outside of this range alternative pedestals are available
The classifications given are based on the use of the Kingspan range of pedestals
Uniformly distributed loads do not form part of EN12825 and are therefore indicative ONLY