Aluminium Curtain Walling

Reynaers

Reynaers offers a range of aluminium curtain-wall systems including CW50, CW60 and CW86. Within these systems, there is the choice of a traditional stick system: a cross-section structure with horizontal and vertical face caps, and the high-technology unitised façade: allowing off-site construction with high speed assembly on-site.

There are various aesthetic options available such as Structurally Clamped; no face caps are required resulting in a seamless exterior glazed façade, and Horizontally Lined; vertical face caps are replaced by an EPDM seal giving a horizontal appearance to the facade. The products are available in over 400 RAL shades and various finishes.

Reynaers’ aluminium products can be recycled time and time again with no loss of quality. Resources are invested into every phase of design and production to minimise the impact on the environment, from profiles developed to give maximum thermal efficiency, through to reducing packaging and recycling waste.

Reynaers fabricators and installers are available throughout the UK. Reynaers also offers technical advice and support direct to architects, fabricators and contractors. Training workshops are available on request.


Properties

MaterialsAluminium
FinishesAnodizing to BS 3987. Powder coating is available in Standard RAL colours.
SizesCW 50-sC
Interior Visible Width = 50 mm
Glass Thickness = from 27 mm to 63 mm

CW 50-ra Flush Roof Vent
Interior Visible Width = 50 mm
Glass Thickness = roof application : from 6mm to 45mm

CW 50/TuTi Hidden Vent (CW 50-sC/TuTi Hidden Vent)
Interior Visible Width = 50 mm/80 mm
Glass Thickness = opening window 22-28 mm (open. window-SC 29-32mm)

CW 86-EF-CG
Interior Visible Width = 86 mm (38.5 - 9 - 38.5)
Glass Thickness = From 4 mm to 38 mm

CW 86-EF-CG (Fixed Façade Junior)
Interior Visible Width = 86 mm (38.5 - 9 - 38.5)
Glass Thickness from 6 mm to 38 mm

CW 86-EF-HI
Interior Visible Width = 86 mm (38.5 - 9 - 38.5)
Glass Thickness from 30 up to 50 mm

CW 86-EF-SG
Interior Visible Width = 86 mm (38.5 - 9 - 38.5)
Glass Thickness from 4 mm to 36 mm

CS 77-FP EI30
Glass thickness from 15 mm to 51 mm

CS 77-FP EI60
from 15 mm to 51 mm

Cw 50-FP EI30
from 23 mm to 51 mm

Cw 50-FP EI60
from 33 mm 48 mm

ColoursStandard RAL colours
NBS clausesH11 Curtain walling
CADhttp://www.reynaers.com/uk/enuk/extranet/register.aspx

Endorsements

Be the first to endorse this product.

Add to Project Board

Create a new project board:

Catalogues

Tech Data

Product News

Case Studies

Reynaers

Reynaers

Reynaers Aluminium is a leading European specialist in the development and marketing of innovative and sustainable aluminium solutions for windows, doors, curtain walling, sliding systems, sun screening and conservatories. Driven by energy-efficiency...
View company profile

Other Products