Car Park Surfacing

Westwood Liquid Technologies

Refurbishment of a multi-storey car park should interfere as little as possible with normal operation. Furthermore, the system must be able to withstand mechanical stress in the long term, so that the intervals between refurbishment measures can be extended.

Modern PMMA resins are fully cured within 30 minutes and can be coated and/or are ready again for use in a flash. Consequently ramps can be refurbished in just a few hours. Entrances and exits can be repaired overnight. Weather conditions are only of secondary importance. The PMMA systems can be installed even at low temperatures and high humidity. Coatings made from flexible PMMA resins are waterproofing and road surfacing in one. They are only approx. 2 – 5 mm thick and weigh only approx. 5 – 8 kg/m2, and they can almost always be applied to existing surfacing, such as concrete and asphalt. There are no removal costs and the multi-storey car park can be kept open.

Due to their chemical structure, PMMA resins are flexible and plasticiser-free. As a result they remain permanently elastic and extensible. Abrasion and wear are minimal. PMMA resins are able to withstand the toughest conditions. In addition, PMMA-based waterproofing and surfacing systems have a high resistance to salts. They possess very high hydrolysis-resistance and are also easy to clean.


Be the first to endorse this product.

Add to Project Board

Create a new project board:

Case Studies

Westwood Liquid Technologies

Westwood Liquid Technologies

Westwood products are designed and intended for use in areas such as roofing, parking, balconies, walkways and flooring. They are rapid curing, hard wearing, flexible, low odour and can also be installed in colder temperatures. Westwood was founded...
View company profile
T(0800) 808 5480
WVisit Westwood Liquid Technologies's website
 Unit 12 Albany park, Cabot Lane, Poole, Dorset, BH17 7BX

Other Products