DALTEX Resin Catalyst

Derbyshire Aggregates Ltd

DALTEX Accelerator/Catalyst should be used for temperatures below 15°C as this can lead to longer curing times and contamination of the surfacing.

Accelerator/Catalyst should be used with each mix to ensure uniformity of cure except for higher consistent temperatures of 25°C.

DALTEX Catalyst/Accelerator Guidelines

Part A should be mixed prior to adding the accelerator (catalyst). Use the syringe provided to dispense accurately into the part A component of the resin and mix for approximately 15 - 20 seconds before adding the Part B component.