Debunking the CE Marking myths

Debunking the CE Marking myths

With CE Marking of timber doorsets expected in 2015 following the publication of BS EN 16034, ASDMA is on hand to offer advice and hopefully dispel some of the myths surrounding CE Marking.

Ian Makins, ASDMA’s Chairman comments: ‘ASDMA is concerned about the confusion and misinformation that surrounds CE marking and it is important that specifiers recognise that the CE mark for timber doors with fire resistance characteristics is applicable only to doorsets and not door assemblies.”

‘For the dominant product on the market in the UK – door assemblies – third party product certification still applies and provides significant higher levels of assurance on product performance and fitness for purpose than CE marking’ said Ian. ‘CE marking and third party certification are not alternatives. They are intended to serve different objectives. And they can co-exist with advantage within the limits of those objectives’.

A new interactive CE Marking flow chart is available on the ASDMA web site where best practice guidance concerning the use and installation of timber doors can also be found.
As a recognised voice of the timber door industry, ASDMA have spent a considerable amount of time scrutinising the European Community source core documents, also consulting with the regulatory authorities in the UK and with Trading Standards who are the designated product contact point in the UK for building products under the CPR.

A full article comparing the CE marking process and third party certification is available on the ASDMA web site for the information of users, specifiers, designers and the industry at large.

The introduction of the Construction Product Regulation (CPR) from 1 July 2014 is widely spoken of as a major change in the marketing of construction products. And so it is, if the intention is to trade across the market of the European Union. But third party product certification schemes provide additional levels of confidence and assurance in fitness for purpose where fire resistance is concerned. ASDMA explains how.

Add to Project Board

Create a new project board:



Ahmarra – Design, Manufacture and Installation of Commercial and Residential Door Solutions. Ahmarra is one of the UK’s leading architectural door and door set manufacturers covering all sectors including aviation, commercial, health,...
View company profile
T(02392) 389 076
F(02392) 389 077
WVisit Ahmarra's website
 Unit 20 Fitzherbert Road, Farlington, Portsmouth, Hampshire, PO6 1SD

Make an enquiry to Ahmarra

You may also be interested in this related Case Study: Ahmarra Doors make their debut at the O2 Read Now