Delta Membrane Systems' PT is an all-rounder

Delta Membrane Systems' PT is an all-rounder

Capable of waterproofing and damp-proofing internal and external walls and vaulted ceilings, above and below ground, in new construction of existing buildings over a contaminated or damp background – Delta-PT is a versatile product that is one of the most popular from the extensive Delta Membrane Systems range. It is a high performance polyethylene membrane which is extruded into a series of studs which create a continuous air gap behind the waterproof membrane.

On the face of the membrane is a welded mesh that allows plasters and renders to bond efficiently to achieve dry and durable finishes. Delta-PT is watertight, resistant to high and low temperature extremes, chemically resistant to acids, alkalis, oil and solvents, and is approved for use in potable water applications. It also provides an effective barrier to the transmission of salts or other contaminants from the substrate.

It can support the long-term loadings likely to be experienced in service without undue deformation. Temperature resistant in the range -30OC to +80OC, Delta-PT is some 0.5mm thick with stud heights of 8mm. Two roll sizes are available – 2m by 20m, and 1.5m by 10m. Potential drainage rates are in the region of 5 litres per second, per m.

Add to Project Board

Create a new project board:


View Damp Proofing Systems (including Membranes) Product Entry
Delta Membrane Systems

Delta Membrane Systems

Delta Membrane Systems Limited is the leading Type C Cavity Drain Membrane manufacturer in the United Kingdom being the UK arm of Dörken Gmbh & Co KG, the world's largest manufacturer of cavity drain membranes.

With over 125 years of...
View company profile

Make an enquiry to Delta Membrane Systems

You may also be interested in this related Product News: Delta: The new HLA Range available now Read Now