Zero mess. Zero waste. Just pure defence against rising damp. Dryrod Damp-Proofing Rods deliver higher performance at a faster installation speed than any other rising damp treatment currently available. The Dryrod System is exclusive to Safeguard Europe, consisting of a 12mm diameter and 180mm length fibre rod supercharged with a powerful water repellent. Simply drill along the mortar lines of the building and insert Dryrod to establish a powerful remedial Damp Proof Cours. Dryrod is BBA-approved to always ensure the correct dose of active ingredient.

● Quick and simple to install (no specialist equipment required)
● No mess - each package of Dryrod is foil-wrapped and the rod system ensures zero spillages
● Pre-dosed for accurate treatment every time - zero waste
● Low-hazard - Dryrod Damp-Proofing Rods are solvent-free, odour-free and non-caustic

No two walls suffering from rising damp are the same. The physical properties of the mortar used to construct walls can vary considerably and have a significant influence on rising damp treatment effectiveness. In rigorous laboratory tests, Dryrod Damp-Proofing Rods have been proven to outperform all tested competitor damp-proofing creams.

Dryrod Damp-Proofing Rods perform in a wide range of conditions:

● Saturated walls (up to 95)
● Low and high alkalinity mortar
● Low and high porosity mortar
● Lime-based or cement-based mortar.

At 12 mm in diameter and 180 mm in length, Dryrod Damp-Proofing Rods are designed for standard UK wall construction. They can easily be cut to size using the Dryrod System Cutting Tool. Following drilling, holes can be cleared with the Dryrod System Hole Clearing Tool.

Get in touch
Interested in the Dryrod damp proofing range? Get in touch at info@safeguardeurope.com or 01403 210204. Their fully qualified technical team are happy to help with any queries and can offer in-depth advice about Damp Proof Course specification.