Fast Build Solutions

Versachimney | Pre-Fabricated Chimneys
New housing sites are using new technology on what looks like traditionally built housing. All the current regulations need to be met and with the pressures of meeting new standards and regulations, housebuilders are always sourcing and assessing new performance designed solutions.

Euroform Products Limited based in Warrington, have developed a new concept Pre-Fabricated Chimney, which is proving to be a major hit within the housebuilding industry.

The system has been developed using materials that have been certified to meet the BRE requirements. This range of Prefabricated Chimneys needs no special foundations, or major alterations to roof trusses and is delivered to site ready to install as a complete kit.

There are three basic types: Pitch – Ridge – Gable to choose from. The Chimneys can be matched to any brick or stone type, as it uses a real brick and stone to achieve the high quality finish. Also Render finish is available.

Euroform has a standard range to offer but can also work to any size or client specification.

Versadorm / Canopies | Pre-fabricated Dormers & Canopies
Using modern methods of construction, Versadorm & Canopies can be pre-fabricated off-site, saving time and money. There are many benefits to using pre-fabricated components, for instance, high specification construction and a quality controlled factory environment.

Versadorm is a one piece, complete GRP dormer. Fully insulated and complete with integral side gutters, Versadorm is delivered direct to site ready to install and dry-line.
The flexibility in design is vast. Euroform can offer a complete design service for the GRP range of Dormer, Canopies, Copings, Finials, Columns and Brackets.

With the GRP range we can supply the highest quality products to match and add decorative appeal to your build whilst helping to keep costs down.

Promonta | Hyrdro Block for Internal Solid Walls
Promonta Hydro Block - is manufactured with silicone included in the mixture to make the block very water-resistant. It is generally used to areas that are particularly at risk from water or damp within the building.

The Hydro block is strongly recommended for the bottom course to prevent walls been affected as the result of a leak or flood. From experience over the years it is in fact the case that if Hydro block is used to the bottom course and if there is a mini flood on the floor, the block is not affected at all.

If there is risk of water during construction, lying on the floor slab for example, then further protection can be offered to the walls by building all the bottom course in the blue Hydro block totally protecting the walls which is recommended. Finally, if some walls had to be built where they were a little exposed for a long period of time, then these can be totally built out of the Hydro block and even a shower of rain, for example, on the face of the wall occurring quite a few times will not damage the blocks at all. This does apply to the built wall, the process of finishing and facing up the wall would not be carried out until the building was dry and completely enclosed.

Gypsum walls can be covered easily with tiles, using suitable adhesive for gypsum materials.

- Read less