Interior Inserts, Stair Nosings, Tactile Studs & Corduroy Bars
The current range of Vulcan aluminium and brass carriers are the result of years of component extrusion development. The inclusion of gritted, slip resistant GRP inserts meets the need for rapid problem solving in new buildings and refurbishment projects.
The range has been used extensively in both commercial and public sector buildings including healthcare and education. Light reflectance values (LRVs) and DDA guidelines can be incorporated into any design.
Tactile Blister studs and Corduroy bars from the VTac range can be used on smooth marble and polished floors, without the need for spoiling appearances, but upgrading to meet the needs of clients, but more importantly, meeting DDA requirements.
Help in the design, installation and servicing of these products is available from Vulcan.
Designed to give the smoothest transition between any floor finish and the nosing. Especially suited for large communal areas, bringing them rapidly up to date, with a contrasting nosing colour, to Approved Document M (effective on New Build, 2004) guidelines.
Available with all Vulcan insert colours, including luminous and hazard. A choice of channel is available to suit all stair shapes, including double inserts and very heavy use (170 range). These can be mounted with resilient floor coverings but should be placed on top of the final layer.
Developed for the 2mm resilient linoleum, the Lino range group of nosing has the unique design feature for the ultimate edge protection. Fitting instructions, opposite, show clearly the benefit of specifying the right product.
With rigidity built into the design, the true performance is for the contractor, having a central heavier 4mm mid section to give positive edges for a no. 8 countersunk screw.
All standard metal finishes available.
The Interlink Range is an attractive product due to having the deepest standard nose drops available.
Beautifully easy to handle and fit due to the rigid design and positive feel. Designs to meet all substrate needs have been catered for, and the 55mm nosings marked with the DDA note, meet Part M, May 2004.
This range of nosings is suitable to be used with all major manufacturers floor coverings and can be project personalized with any RAL colour insert* or metal finishes of Aluminium, Anodized, Polished or Mirror.
Interlocking sections available to extend across the whole tread, leaving a maintenance free surface.
The perfect retro fit nosing for any completed project. The 180 range can be used to either repair worn carpet by overfitting (Vul 188c or brass Vul 288c) or secure the carpet back to the nosing with Vul 188crd.
The highest quality nosing for the highest quality project. Polished Brass Designs for all stair substrates, shapes and styles. External step products can be achieved by using the VulcaGR!P® insert product or the VUL 200 which has no insert.
Ramp back profiles mean that all Hotel Terrazzo interiors can be upgraded in an instant. Used with the correct adhesives, these can be placed straight on the substrate, with no mechanical fixings.
Ramp backs can also be placed and secured on a floor covering. The Brass Interlink can help extend the tread coverage to give more stability underfoot and the front insert can be a differing colour to the back insert to help meet DDA.