Hauraton Limited have introduced into the UK, RECYFIX® MONOTEC, their new high capacity channel system for the surface drainage of pavements, bicycle routes, car/van parks and roadways in and around residential, commercial and light industrial areas where the channels need to have high lateral strength, are capable of withstanding continuous compressive loads and where ease of installation is a major consideration.

The RECYFIX® MONOTEC one metre long channel component is of a sturdy monolithic design where the grating and the tongue and groove linking system are integral to the channel moulding. The whole unit is made of tough, virtually unbreakable polypropylene (PP) formulated to be very resistant to daily temperature fluctuations from frost conditions to strong sunlight, including the Ultra Violet (UV) spectrum. PP is naturally resistant to de-icing salt.

Complying with the requirements of EN 1433, the PP is given its UV resistance by adding just sufficient carbon black as a stabiliser so that the structural strength of the material is unaffected and a consistent appearance is maintained.

MONOTEC channels are offered in two nominal grating widths of 100 and 200mm, both suitable for a loading category of up to Class D400. The 100mm channels are available in three overall heights; 230, 280 and 380mm and provide channel cross-sections of 190.5 cm2, 245.5 cm2, and 355.5cm2 respectively. The largest 200mm channel, which only weighs 16.2kg, has a cross-section of 746.1 cm2 and so has an attenuation volume in excess of 74 litres per meter.