SuraFlow-GutterGuard Fitting Instructions

SuraFlow-GutterGuard Fitting Instructions

Generally, professional fitters install SuraFlow-GutterGuard, but if you feel you are competent at DIY and have the equipment to access your gutters, you might want to have a go yourself after reading the fitting instructions.

Fitting Instructions
Firstly, ensure that you have a minimum of 35mm between the bottom of your roof tiles and the top of your gutter.

SuraFlow-GutterGuard is simple to install, using a spacer clip at the rear of the gutter and a spacer clip at the front.

The guard is ‘fixed’ every length (2 metres) using a self tapping screw through the front of the gutter and picking up on the downward leg of the guard.

Lengths of SuraFlow-GutterGuard are joined together using the supplied joiner and butted up to each other. They do not need to be sealed.

Corners are formed by cutting a mitre and using a corner joiner. Corners are available pre-cut.

Endcaps are fixed into the joiner channels at end of the guard.

Add to Project Board

Create a new project board:


Categories

Gutter leafguards