1st Coat is Primer

There are 3 options:

Primer-T for glossy/ smalto tiles surface.
PRIMER-Τ is one component, colorless, non-staining primer especially designed to secure the adhesion of Hyperdesmo-Τ® on non-porous substrates..
Chemically, PRIMER-Τ is a composed of a moisture reacting organosilane in a mixture of solvents and additives to ensure overall wetting of the substrate.

Primer-W for glossy/ smalto tiles surface. Water based version for indoor applications.
PRIMER-W is one component, water based colorless, non-staining primer especially designed to secure the adhesion of Hyperdesmo-Τ® on non-porous substrates.

MICROPRIMER-PU for absorbing surfaces, tiles that are not glossy (eg. Cotto)
MICRPRIMER is a one component, low viscosity, 100% aliphatic polyurethane based primer suitable for all substrates.
It is characterized by its very low viscosity, excellent impregnation, non-yellowing (non-staining) properties combined with a relatively fast cure speed and most importantly its excellent adhesion on both non-porous and porous substrates.

Main Coat is HYPERDESMO-T

HYPERDESMO®-T is a transparent, single component high solids, polyurethane resin, which cures with the humidity in the atmosphere to produces an elastic, highly durable, highly hydrophobic membrane with excellent UV resistance. It is recommended for waterproofing applications over tiles, marble and even wooden surfaces. Being aliphatic, it does not yellow/discolor when permanently exposed to sunlight.

Topcoat is AQUASMART-TC-Floor protect

AQUASMART-TC-Floor Protect is unique water based two component, Aliphatic, Satin Finish Polyurethane Top-Coat.
AQUASMART® –TC 2K Floor Protect is a two component, water based, aliphatic coating with exceptional performance in a multitude of applications. The product is highly recommended for the protection of epoxy and polyurethane self levelling floors as well as cement based self-leveling mortars, natural stones, marbles, granites, concrete surfaces and screeds. It can be also applied as a satine finish anti-stain topcoat over HYPERDESMO-T.
AQUASMART® –TC 2K Floor Protect has excellent UV, chemical, water and abrasion resistance. The product has excellent resistance to staining.

Application is carried out with a roller with at a consumption of 150-300 gr/m2 in one or two coats.