3 powerful reasons to choose channels with slope

3 powerful reasons to choose channels with slope

Discover the benefits of installing channels with a built-in slope of 2.5% with ULMA Architectural Solutions.

In some locations, it may be difficult to find the most suitable drainage system. For this reason, ULMA have their technical department, which in addition to advising you, develops products like this, which solves the lack of slope in the ground.

These channels with built-in slope are the unique to the market with a real slope of 2.5% which, thanks to their marked slope, provide greater hydraulic capacity, and resolve the slope limitations that can be found in some places.

Other benefits include:

1) Saving in product and installation costs. With the slope that is created in the drainage system, the water is accelerated. Thanks to the speed it reaches, it drains more water, as if a larger channel had been installed. Thus, there are savings on both installation and product (by buying smaller channels). It drains up to 100 l/s in 20 ml, according to a study carried out by the UPC University.

2) Saving in installation time and building costs. ULMA can install up to 40 linear metres, in two 20-metre sections, with a single water outlet. This helps to drain large areas of land and rainwater, with very few outlets. This will ultimately save on installation time and reduce construction costs.

3) Savings in cleaning and maintenance. Thanks to the speed of the water coming down the channel, it drags away the sediments, such as dust or stones, accumulated in the absence of rain. It creates a self-cleaning effect. This effect would not be possible in an installation without a slope and reduces the need for cleaning and maintenance. In addition, it guarantees that 100% of the channel section is in perfect condition to drain.

Add to Project Board

Create a new project board:


View Surface Water Drainage Channels Product Entry
ULMA Architectural Solutions

ULMA Architectural Solutions

ULMA Architectural Solutions were formed in 1990 within the ULMA Group and since that time they have been growing, developing a wide range of polymer concrete products aimed at Drainage Solutions market.

Prefabricated Systems for ULMA...
View company profile
T(+44) 0754 2982 022
 0793 221 5849 Tech Dept.
Emikelgarcia@ulmaarchitectural.com
WVisit ULMA Architectural Solutions's website
 Unit 20B Access 18, Avonmouth, Bristol, BS11 8HT

Make an enquiry to ULMA Architectural Solutions

You may also be interested in this related Product News: New Slot Drain H25 for Height Limitations Read Now