Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Profiled Systems

Central Fabrications Midlands

Central is able to offer a wide range of roofing and cladding options, for both the new build and refurbishment markets. Correctly specified, a rainscreen cladding system will provide insulating properties whilst controlling water, wind and fire.

The primary driver for a rainscreen cladding system is usually down to the visual impact of the building. But the desire for aesthetics has to be combined with performance, waterproofing the building and contributing to the overall thermal performance.

BENEFITS

• Design versatility with structural design framing and fixing systems
• Lightweight
• Easy to install system
• Low maintenance and durable facade solution
• Thermally isolated contact points back to the primary structure
• Extensive range of materials and finishes
• Complementary fully fabricated eaves systems
• In-house design support and technical advice centre

Centrals product range of external facade options ranges from the simple recessed fix metal trays through to more complex and bespoke systems. Pressed metal panels are available in fully secret fixed systems, utilising either cassette or hook-on type joint details.

There are three main types of rainscreen cladding /external wall cladding systems that they can supply:

Full Envelope Systems

Central is able to offer contractors a full envelope systems.

The system comprises the following products:

• CFF 32/1000 roof and cladding sheet
• CFF 19/1000 liner sheet
• Insulation
• Fixings

Anti-Condensation Backing

Some building types may be subject to condensation forming on the underside of the roof, such as an un-insulated warehouse or agricultural building and to reduce the chance of dripping water within a building environment, profiled sheets complete with anti-condensation fleece can be supplied.

Curved Sheets Barrel Vault

The CEN-R 32/1000 roof profile will self-curve down to a minimum radius of 40.000 meters. Below this radius, the sheets will require 'crimping' in order to achieve the required curve radii. The more crimps, the tighter the curve.

The maximum sheet length available for this type of curve is 6.000 meters. Therefore, when more than one sheet is required to cover from eave to eave, it is recommended that one sheet sits at the 'apex' of the roof, to create a lap of minimum 4 degrees, with the remaining sheets fitted either side.

Deliveries are made daily throughout the UK from the extensive stock range which allows Central to offer short lead times of normally around 7 days from receipt of cut lengths.

Endorsements

Be the first to endorse this product.

Add to Project Board

Create a new project board:

Central Fabrications Midlands

Central Fabrications Midlands

Situated in the West Midlands, Central Fabrications set out to supply market leading, precision engineered, architectural fabrication and facades throughout the UK.

With a comprehensive range of materials and finishes in stock, along with...
View company profile
T01922 658 899
F01922 614 325
E[email protected]
WVisit Central Fabrications Midlands's website
 Wallows Lane, Walsall, West Midlands, WS1 4AG

Other Products