Their roofing systems provide a range of styles and designs options that allow natural daylight to brighten up a new or existing space as well as being used to create an impressive room feature.
Flat Rooflight System
Designed to meet the needs of the modern commercial building using sustainable materials which deliver superior aesthetics and crisp clean lines their flat rooflight is available in three different designs:
Fixed - fully thermal efficient and secure, available as a standard or walk-on option.
Ventilation - opens up by 360mm using electrically or manually operated concealed chain drive actuators to enable air to filter into the room.
Egress - Ideal for any building that may require an alternative means of access for maintenance purposes, or fire escape window. With built in gas springs and espagnolette locking, it is designed to open up to a 70 degree angle allowing easy access to the rooftop.
The system will accept double or triple glazed units up to 42mm including a walk on option.
Thermal Lantern System
Designed to make fabrication simple, stress and fuss-free the thermal lantern system is available in kit form and can be easily assembled. Sections are fully thermally broken and no compound mitre cuts are required during fabrication. Corner joints are performed with mechanical cleats which with the aid of punch tooling provide a strong, neat and secure joint. This system makes transportation, and manual handling of the materials onto the roof and insitu assembly much easier.
Designed to sit on timber structures their rafter bar system is ideal for installation purposes when creating a roof for a walkway or extension. The system is designed to accept either polycarbonate sheeting or glass panes ranging from 6-24mm.
The roof glazing bar range can be specified as standard or thermally improved versions. Light, standard and heavy-duty glazing bars are available. Square and sloping caps are designed to work with common infill materials from 6mm glass through to multi-wall polycarbonate sheet and insulating glass units. The range of profiles includes sheet closures, eaves and end fillers, adjustable wall plate, rafter bars, fixing plates and end and glass stops.