The SkyMono Rooflight by Skymaker is a mono pitched rooflight designed to create a clean and minimalist look.
The SkyMono Rooflight helps maximise the natural daylight into a room with a frameless internal view.
It incorporates an in-house designed aluminium perimeter framework, which is designed to sit over a pre-manufactured builders work upstand, creating uninterrupted views and maximising the natural daylight to the room below.
The framework is supplied in a hard wearing and low maintenance dual colour polyester powder coated finish and is installed with a high specification double glazed unit incorporating warm edge spacers and Low E glass.
The glass unit is factory bonded into the frame, all to create a flush silicone filled external surface free from any water or dirt traps.
All of Skymaker rooflights are supplied with full installation instructions and hardware kit to allow installation for any person with practical DIY skills.
Skymaker’s in-house designed Thermally-broken Extruded Aluminium Profile
RAL 7015 Slate Grey External and RAL 9010 Pure White Internal
Standard glazing offering:
– 6mm clear toughened outer
– 16mm warm edge spacer with argon
– 6mm clear toughened Low E inner
– Light Transmission of 78.7%
Glazing to suit your specific requirements i.e. Acoustic, Solar Gain, Privacy etc.
Any RAL colour
Ritec ClearShield Eco-Glass™ easy-clean coating
Bespoke Shapes available