SS MagVent air and dirt separators

Fabricated Products

Comprised of a very fine stainless-steel strainer that is capable of removing air and microbubbles along with a high-gauss magnetic rod.

These two elements combined together provide a very powerful cleaning device. As the water flows through the unit the magnetite is attracted to the magnetic rod and even the smallest particles down to 5 micron and less are collected.

All magnetite which flows through the unit will be 100% removed.

SS Magvent Air, Dirt & Magnetite Separator SS MAGCVAD
The SS Magvent (SS MAGCAVD) is used to remove Air Magnetite Sludge and Dirt. Installed on the flow pipe(heating) or the return pipe (chilled water) in the system the SS Magvent (SS MAGCAVD) will eliminate air and all types of dirt particles from heating and chilled water systems.

Features and Benefits

• High-gauss magnetic rod installed to remove all magnetite in the water system.
• Greatly reduced commissioning times after initial fill.
• Longer system life (through air and dirt elimination)
• Low-pressure drop
• Bi-directional flow
• Maximum Temperature. 110 °c. Higher temperature units available on request.
• Tested to 21 bar
• All stainless steel construction.
• Air collects in the air chamber before being automatically vented
• Floating dirt can be removed by opening the valve situated under the air vent.
• The same valve is used for releasing air when filling the system
• Large collector ensures that flushing is only required now and then
• Can be flushed while fully operational (no need to shut down)
• An internal stainless steel concentrator to aid removal of air and dirt.
• Smooth surfaces with Stainless Steel lead to lower friction
• Stainless will not degrade in service thanks to its excellent resistance to corrosion.
• Stainless Steel is extensively more resistant to oxidation by water and biocides than carbon steel. Therefore Stainless Steels are not contributing to oxidation, sludge's etc.;
• Thermal properties of stainless steel. They are far superior to iron or carbon steel.
• Maximum flow rate up to 3m/sec


MaterialsStainless Steel


Be the first to endorse this product.

Add to Project Board

Create a new project board:


Fabricated Products

Fabricated Products

The manufacturer and supplier of products and services that are utilised by many global companies within the Water Treatment and Heating industry and with installations in many commercial and industrial sectors such as Hospitals, Schools,...
View company profile
T(0843) 886 9783
F(0845) 601 3337
WVisit Fabricated Products's website
 Unit 1, Fullerton Road, Rotherham, South Yorkshire, S60 1DJ

Other Products


Water filters