Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Triton TWS EX100

Triton Systems

Triton TWS-EX100 is a self-adhesive sheet membrane constructed from cross-laminated HDPE sheeting and a bitumen-polymer adhesive compound.

The tough, durable sheeting has an overall thickness of 1.5mm and can be applied to horizontal and vertical surfaces.

Its primary use is for internal and external tanking to prevent the ingress of water and waterborne aggressive salts such as chlorides and sulphates from penetrating concrete structures.

Being water and vapour resistant, Triton TWS-EX100 has many waterproofing applications including foundations, basements, roofs and decks, lift shafts and pits, car parks, subways, bathrooms and balconies.

A unique feature is its selvedge that enables a fast and secure seal on all side edge laps.

Triton TWS-EX100 is available in 19.05M x 1050mm rolls. Uneven surfaces must be made good to ensure a smooth surface for the application of Triton TWS-EX100.

BS 8102:2009 defines Triton TWS-EX100 as a Type A or ‘barrier’ waterproofing system – that is one where the prevention of water ingress depends upon a separate barrier applied to the structure. This type of waterproofing is often known as ‘tanking’.

Type A systems can be further categorized into fully bonded, liquid applied, cementitious and bentonite clay liner types. Triton TWS-EX100 is a fully bonded system.

Triton Systems supplies a comprehensive range of each type including all the ancillary products required for their installation such as primers, sealers, repair mortars and reinforcing fabrics.

Other fully bonded systems available from Triton include dual solution, self-adhesive membranes that also act as barriers against Radon, Methane, Carbon Dioxide, and Bentonite liners that comprise a Bentonite-impregnated fibre layer that forms a tenacious mechanical bond to poured concrete while self-healing and actively keeping the water out. BBA certified versions of each type are available if required.

Endorsements

Be the first to endorse this product.

Add to Project Board

Create a new project board:

Catalogues

Tech Data

Triton Systems

Triton Systems

Triton Systems has been supplying the construction industry for more than 40 years. Today the company is best known as a supplier of structural waterproofing systems, alongside a comprehensive range of products used in building preservation....
View company profile
T01322 318830
F01322 524017
E[email protected]
WVisit Triton Systems's website
 Units 3 - 5 Crayford Commercial Centre, Greyhound Way, Crayford, Kent, DA1 4HF

Other Products