The VSG1 (Valve shower gully) has been developed to satisfy customer demand for a shallow gully suitable for installation in floors where depth is restricted.
The overall height of the VSG1 is only 75mm and the valve is a substitute for a regulatory water seal trap which cannot be incorporated in a gully of this height.
There are currently no regulations to cover the use of anything other than water seal traps in domestic drainage systems. Although valves have been in existence for sometime, it is advisable to seek guidance from the local building control department prior to use.
The valve acts as a non return valve, the weight of the water discharge will open the valve and it will re-seal when the discharge has ceased thus prohibiting foul air from entering the dwelling.
The valve eliminates the release of foul air due to back flow.
The valve can be easily removed to facilitate easy cleaning of the gully.
The VSG1 range has a minimum flow rate of 30 litres per minute when tested with a 15mm head of water.
Push on cover plate has no screws so can be easily removed for access, but will remain in place when pressure is applied from a wheelchair for when stood on.
Suitable for use with flexible sheet flooring.
Use with our Eco-dec® & ShowerDec range of floor formers.
Supplied with a FLEXCON6 1½ flexible compression connector to assist installation
Contour Showers now has one of the most extensive ranges of easy access showering solutions available, including eco-friendly wetroom floor formers, level access, low level and step-in shower trays, and shower doors and cubicles, all carefully designed to help meet each users needs.
View Prinia Shower Tray Product Entry