What are 'warm-to-touch' guidelines for handrails? [BLOG]

What are 'warm-to-touch' guidelines for handrails? [BLOG]

'Warm-to-touch’ is a well-known phrase, commonly associated with handrails in high-usage areas, such as entrance ramps and corridor handrails. But what does it mean and what materials can be classified as ‘warm-to-touch’ for specification in these environments?

Document K of the building regulations outlines that handrails should not “become excessively cold or hot to touch” (Ref 1.36 e, pg. 15). This is reinforced by section 5.10.5 of BS 8300 which opens this requirement up further. The concept is that handrails provide support on stairs or ramps and may help the user as they ascend or descend. If the environment is subject to extreme temperatures and the handrail conducts this temperature, this may cause reluctance to use the handrail and therefore cause a safety risk.

What considerations must be made when specifying a ‘warm-to-touch’ handrail?

Typically PVC or timber handrails are specified due to their very low thermal conductivity properties. However, the thermal conductivity properties must be weighed up against durability and whether the material is actually suitable for the environment. It is also important to remember that a handrail will only become ‘hot’ or ‘cold’ if it is in an environment that is subject to large temperature variations, for example indoor locations are less likely to require ‘warm-to-touch’ considerations.

General statistics show that PVC and Timber handrails have the lowest thermal conductivity readings. However, in a lot of high-use external environments where ‘warm-to-touch’ applies, a more durable metal handrail would be required. Stainless steel has one of the lowest thermal conductivity readings of any metal and meets the durability demands of these locations. The BS 8300 document actually makes reference to stainless steel as being an adequate option to fulfil requirements of ‘warm-to-touch’.

BA Systems provides a full and comprehensive design, manufacture and install service of our balustrade and handrail products and systems. Find out more about BA Systems on this link here.

Add to Project Board

Create a new project board:


BA Systems

BA Systems

Innovation in balustrades and handrails BA Systems, formerly Brass Age, is a well-established company with 20 years experience in the design, manufacture and installation of some of the finest handrail and balustrade systems. Manufactured from...
View company profile
T(01603) 722330
F(01603) 722777
Eben.hynd@basystems.co.uk
WVisit BA Systems's website
 22 Bidwell Road, Rackheath Ind Est, Norwich, Norfolk, NR13 6PT

Make an enquiry to BA Systems

You may also be interested in this related Company News: 5 important considerations when designing Juliette balconies from BA Systems Read Now