A blog written by Stannah Lifts

Did you know that every year more than a third of all over-3-day injuries reported to the Health and Safety Executive (HSE) or local authorities are due to manual handling – the transporting or supporting of loads by hand or bodily force?

Most of these incidents cause back injury and lead to, on average, 18.4 days off work. In some cases, the victim never recovers. This massive human and economic cost is not just caused by the handling of heavy loads, as many injuries also arise through the repetitive handling of lightweight or difficult-to-handle loads.

The types of loads that cause manual handling injuries is vast and could include anything from boxes of goods to animals and patients needing medical attention. Injury-inducing settings range from factories and offices, hospitals and banks, to building sites or even while out and about making deliveries.

The Manual Handling Operations Regulations 1992 (MHOR) exist to help prevent many of these injuries. Regrettably, injuries still occur through manual handling tasks even when individuals know the correct lifting techniques and their physical limitations. Such injuries cause numerous operational problems for businesses, including reduced workplace productivity and morale, to increased financial costs.

The HSE Health and Safety statistics (2020) and effects on business:

• 1.7 million working people suffering from a work-related illness

• An estimated 32.5 working days (2020/21) lost due to work-related injuries

• Handling is one of the most frequent causes of over-7-day injuries (RIDDOR), accounting for 25% overall

• The annual cost of work-related injury and new cases of ill health in 2018/19, excluding long-latency illnesses such as cancer, is estimated at £16.2 billion.

So what can you do to stop these types of costly accidents?

To manage your business's health and safety, reduce the risk in your workplace. The initial step to preventing injury caused by manual handling activities is to evaluate whether the object needs to be moved or if the task can be performed safely in its current location. If the object can be moved safely, always follow good handling practices to minimise the risk of injury. The subsequent step involves assessing what risks exist in your workplace.

Assess the risks in your workplace – considerations and things to look for when making a risk assessment

This process is known as a risk assessment and is something you are required to conduct by law. By carefully observing and evaluating your employees' workspace you can make a decision as to whether manual handling is right for your daily operations.

The process can be split into three sections:

1. The task

If they involve holding loads away from the body, carrying them long distances, up stairs or twisting, stooping or reaching then you should assess if these tasks could be better completed mechanically.

2. The load

If they are very hot, difficult to grasp or very heavy and need strenuous pushing and pulling, you might want to consider mechanical help for moving these loads.

3. The working environment

Perhaps you need to move goods over floors, which involves your staff walking up and down stairs repeatedly, this may result in slips, trips or falls. If there is poor lighting, a high footfall in the space where your goods need to be moved, or restricted space, then there is a better solution than manual handling and carrying loads up stairs or through busy areas.

If you’re answering yes to many of these questions, then it is strongly advised that you contemplate installing a service or goods lift to help lighten the load, speed-up productivity and, most of all, make your workplace much safer for your employees.