Comar 7 is the specifier and installer preferred aluminium commercial door system throughout the UK.
The extensive profile range, designed specifically for ease of fabrication and installation and developed for bespoke projects, provides combinations such as sliding, folding, rebated, swing, Armoured Glass (AG) and pivot doors.
Three ranges are available: Comar 7, Comar 7 High Performance Tempest and Comar 7Pi polyamide doors. Comar 7Pi provides durability and maximum thermal efficiency that exceeds the requirements of Document L.
Comar 7 is face drained and has a variety of drained or non-drained thresholds, including low ramp thresholds to comply with building regulations such as the Disability Discrimination Act (DDA).
With an extensive range of door stiles with sight lines ranging from 28 to 110mm and rails from 10 to 200mm, that can be internally or externally beaded, Comar 7 provides the capability to achieve durability, performance and visual appeal.
These profile options allow construction of combinations of single leaf doors up to 1,200 wide and 2,300mm high. However, dependent on the location, glass type, hardware and door type larger configurations, such as vehicle access, sliding doors can be manufactured. Advice is available from Comar's Technical Department for specific projects. Doors can be glazed with panels or glass up to 51mm.
Comar 7 has developed over 30 years to provide solutions; evidence of this lies in its unique Automatic Door Beams. These door beams are a single extrusion that support automatic door gearing. They offer maximum strength whilst enhancing the appearance of sliding or swing doors by reducing the need for unsightly aluminium panels and timber packing. Comar 7 Auto Door Beams have been designed to accept virtually all types of bolt-on operating gear.
Comar 7 integrates into Comar's ground floor framing, curtain walling suites and couples to window suites to provide fixed and opening fan and side light options.
Comar 7 Tempest doors have exceeded the requirements of BS 6375 reporting no water leakage at 1,200pa.
Comar 7 utilises AXIM architectural hardware. The AXIM range includes transom closers, panic devices, flush bolts, letter-plates, locks, paddle handles, lever handles which can be delivered in a variety of finishes, including co-ordinating polyester powder coating. Therefore, from a single source, Comar 7 offers a complete solution.
For further technical information or pricing, please contact Comar's Marketing Department on (020) 8685 9685 or email projects@parksidegrp.co.uk.