COVID: Back to the office? 3 checks to get your lift ready [BLOG]

COVID: Back to the office? 3 checks to get your lift ready [BLOG]

As people return to work and pubs, shops, hotels and other businesses resume. The key question is, are you ready? As a lift owner, it’s important to have your plans in place.

The lift owner’s reopening checklist

There are three main areas to think about when it comes to getting your lift prepared:

Managing people flow

Q: Can you stagger start, finish times and break times?
In most buildings, the pinch points for traffic are often the doors, stairs and lifts leading in and out of the building. By staggering times, you can reduce peak traffic flow.

Q: Is it clear how you want people to behave?
In multi-tenanted buildings, there may be different needs between tenants, so communication will be key. In all cases, and whatever the measures put in place, the building users will not be used to changes. Posters, email briefings and instructions prior to returning to work will be key to communicating these new building rules to returning staff.

Q: What does social distancing mean for the number of people in a lift?
In most cases, it won’t be possible to achieve the required distance between lift users. The UK Government recommends the following:

1. Reducing maximum occupancy for lifts, providing hand sanitiser for the operation of lifts and encouraging the use of stairs wherever possible.
2. Making sure that people with disabilities are able to access lifts.
3. Regulating the use of high traffic areas including corridors, lifts turnstiles and walkways to maintain social distancing.

Obviously, this has a significant impact on people traffic flow and lift use, slowing building movement and more journeys affecting lift wear and tear. Stannah can supply social distancing graphics and signage for your building.

Q: Can the lift be reserved for those who need it most?
A short-term solution could be to use stairs and keep the lift for those with accessibility needs and deliveries.

Q: What does social distancing mean on escalators?
Like elsewhere, instruct users to leave 5 escalator steps (or 2 metres on a moving walkway) between themselves and another user, with overtaking forbidden. One possible option is to add blue safety feet, or similar tape signage to show feet placement.

An escalator company, such as Stannah, can assist – it may look simple to do, but if not correctly done it could cause significant and costly damage. On both pieces of equipment disembarking slows travel speed, so it’s worth giving more space than less.

It is also important that you consider other social distancing, or building flow restrictions, in conjunction with each other. With an escalator or moving walkway, always ensure no other restrictions are going to inhibit passengers' disembarking. The escalator or moving walkway will not be able to easily be slowed (your service provider could temporarily do this) or stopped unless it’s an emergency. So, you could find a situation where passengers start to distance queue for the next area and are backed up into those disembarking passengers behind them.

Q: And for lobbies and disembarking areas?
Restriction on the number of people in the lift/escalator will likely lead to queues forming in lobbies and how to handle them. Therefore, consider floor markings to identify a waiting area to help distance people prior to use.

Any area set aside for this should be separate to another use. Also, ensure it’s clear for users to move away from entrances/exits after using the lifting device.

Legal obligations, LOLER and servicing

Q: Is your paperwork up to date? Get any required visits booked in early
It's worth checking you are up to date legally and your lift is fully compliant. Any advance work in this area will really assist in being ready for reoccupation.

The three key legal obligations for lifts are:

• Undertake Lifting Operations & Lifting Equipment Regulations (LOLER) thorough inspections regularly
• Ensure maintenance and breakdown cover is in place and undertake any servicing due
• Ensure a communication system is in place to enable trapped passengers to contact the rescue service

For many, once lockdown began it meant planned service visits and LOLER inspections were cancelled. Check your LOLER inspection records to confirm if you have a valid inspection for your lift and when servicing was last undertaken.

If any were due and/or delayed as your building is closed, then make arrangements for the inspection to be completed at the earliest opportunity, ideally, before your building reopens.
Any change in stages or industry reopens will likely lead to an influx of demand and you may struggle to get a visit, planning ahead will save disappointment!

Q: Did you turn your lift off? Or not been used in a while?
Getting it going again might not be quite as easy... if your equipment is under-utilised for a period of time, it may not perform as expected when needed. Find here, Stannah's recommended actions you'd need to take if your lift's not been used in a while.

A LOLER inspection will be required and any lift that has been switched off should be switched back on by a competent lift engineer, to ensure the safety of the equipment, before it’s placed back into service.

Unknown dangers lurk beneath and some could be costly at a time you’re trying to avoid unnecessary expense. A safety check will help to prevent such issues and it's always worth asking your lift company to give it a once over – after all preventative care is always cheaper than reactive.

Q: Servicing - more use may mean more care
With your lift working harder than it's used to, it might get a little more temperamental. If your lift plays a pivotal role in reopening your building and you've been putting off a lift upgrade/repair, then now might be the time to do it.

Updated cleaning procedures

Q: Have you put additional cleaning procedures in place?
Like elsewhere in the building there needs to be additional cleaning, paying particular attention to touched surfaces such as handles, bathroom and shared drinking/eating facilities and of course, lifts.

Lifts contain multiple touchable surfaces - landing controls, lift car controls, handrails to name a few. Each surface could transfer the virus and therefore additional cleaning and disinfecting will be required. Click here for more details on lift cleaning.

For escalators, the main surface is the handrail, which users should always hold for safety. Devices can be fitted to escalator handrails to enable self-cleaning and are a worthwhile consideration in locations such as supermarkets, shopping centres, stations and airports. Take a look at Stannah's advice on escalator cleaning here.

How can Stannah help me?

Stannah Lift Services can help you to meet your obligations as a lift owner/operator by providing repairs, maintenance and supporting lift services on all types of lifts from all manufacturers.

Click here to view Stannah’s handy guide covering everything you need to know about lift ownership and download your free guide to lift servicing and maintenance.

Add to Project Board

Create a new project board:


Stannah Lifts

Stannah Lifts

In 1867 Joseph Stannah began engineering lifts and cranes for London’s dock yards. Five generations on, this family owned, British business still uses its engineering expertise to keep people and goods moving. Today the business sells passenger lifts,...
View company profile

Categories

Escalators Handrails Hotels Lift and escalator contractors Lifts Lifts, electric Lifts, hospital/healthcare buildings

Show all categories

Make an enquiry to Stannah Lifts

You may also be interested in this related Product News: Stannah unveils stylish new vertical platform lifts with more choice than ever before Read Now
Subscribe to the Barbour Product Search newsletter