Dulux Trade Vinyl Matt
Dulux Trade
Dulux Trade Vinyl Matt is a top quality high opacity emulsion based on unique AkzoNobel technology which gives excellent coverage with a high quality finish. Dulux Trade Vinyl Matt has a good flow for easy application. Suitable for all normal interior wall and ceiling surfaces.
Dulux Trade's formula is 99.9% VOC free, based on in-can VOC content and measured in accordance with ISO 11890-2:2013.
Key Benefits
✔ High Quality Finish
✔ Smooth flow for an easy application
✔ Excellent Opacity & Coverage
✔ 99.9% VOC free* (*based on in-can VOC content and measured in accordance with ISO 11890-2:2013)
Application Description
Application: Brush, roller or airless spray STIR THOROUGHLY BEFORE USE. Seal new or bare surfaces with a thinned first coat of Dulux Trade Vinyl Matt (up to 1 part clean water to 5 parts paint). The normal finishing process is 2 full coats of Dulux Trade Vinyl Matt but on previously painted surfaces in good condition where similar colours are used, 1 coat may be sufficient.
For best colour consistency, purchase sufficient tinted paint for each job, including touch-in, at one time from the same source.
Airless Spray: For best results use a 515 or 517 Low Pressure tip @ 1300 -1700 psi (89 – 117 bar).
Alternatively use a 515 or 517 tip @ 2200 – 2600 psi (152 – 179 bar).
Please note that the above recommendations are intended as a guideline only and some adjustments may need to be made to accommodate equipment type & age, substrate type and individual site & atmospheric conditions.
Finish | Matt |
---|---|
Coverage | Up to 17m² per litre |
Drying Time | Dependent on temperature and humidity |
Recoatable | 2-4 hours |
Thinning | Sealing new or bare surfaces- Add up to 1 part clean water to 5 parts paint. Normal use (not to be exceeded)- Add up to 1 part clean water to 10 parts paint. Airless spray application- For normal use no thinning is required. |
Composition | Water-based |