The new Guardian LST from Jaga Heating Products has been specifically designed to be the UK’s fastest and easiest low surface temperature (LST) radiator to install.

On site, it would take a single professional installer just a matter of minutes to install any Jaga Guardian LST, without any special training, whereas a traditional steel panel radiator based LST radiator will take longer and need a team of 2 for anything over 1m long.

The new Guardian LST also provides the perfect combination of high output heat convection and safe surface temperature for a range of applications. Jaga recommends the Guardian LST for use in locations including care and nursing homes, sheltered housing, a wide range of educational buildings from nurseries and pre-schools through to secondary schools and university student accommodation, healthcare centres and public buildings.

Available in wall mounted (WT) and flush to the floor (FT) options to cover every application, the Guardian LST achieves its super-fast installation time through being designed as a lightweight yet robust, single piece casing that is easy to lift and handle by a tradesman working alone. This visually stylish and strong casing has rounded corners and chamfered profiles to avoid sharp edges and minimise the risk of injury to building occupants from accidental impact.

For the wall (WT) model heights range from 400mm to 600mm, lengths from 440mm to 1840mm with outputs as high as 5671 watts/hour at EN442 (19350 BTU/hour). For the flush to the floor Guardian LST FT model, height options vary from 40mm to 80mm, lengths from 440mm to 1840mm and outputs from 330 watts/hour (1126BTU/hour) up to 5750 watts/hours (19620 BTU/hour) which is nearly twice the most powerful standard heat output of any steel-panel based LST radiator currently available from other manufacturers.