Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

LED illuminated handrail and balustrade solution

LED illuminated handrail and balustrade solution

Combining practicality with bespoke design, DW Windsor’s Garda handrail solution uniformly lights the whole path, even when lit solely from one side, without the need for additional pole or wall-mounted luminaires.

Made from brushed stainless steel and available in curved, arched or straight sections in a range of lengths, it gives great flexibility of design and a seamless end result. The LED handrail provides genuine symmetric or asymmetric distribution onto the ground, without the need to angle the whole section, preventing any spill light or glare above the horizontal. Further options are also available on request, including: colour temperature, ‘warm to touch’ coating, dimmable and emergency versions.

DW Windsor offers a turnkey solution, including full survey, fabrication, installation and project management to your specific design requirements. It fully complies with BS5395 for subways, footbridges, stairways and ramps and Part K of the Building Regulations.

Key Features
 Bespoke handrail and balustrade turnkey solution
 Uses energy efficient LED modules
 Uniform photometric performance
 Choice of genuine asymmetric or symmetric lighting distribution
 Modules available in straight or flexible sections, in lengths of: 300mm, 600mm, 900mm and 1200mm
 Virtually maintenance free
 Service life in excess of 60,000 hours to 70% output
 LEDs available in neutral white, 4000K / warm white, 3000K with colour rendering index 75 / 85 respectively
 Stainless steel grade 316
 ‘Warm to touch’ coating, dimmable or 3h maintained emergency versions available on request
 Tamper resistant fixings and impact resistant (IK10) polycarbonate lenses
 Part K compliant to 1.5kN at 1.5m stanchion centres on request
 Waterproof to IP66
 Supply options: 24V to 48V AC or DC, Class III SELV, 350mA

Download the datasheet, visit the Garda microsite: www.dww-garda.com or call 01992 474607 to order a hard copy or arrange for a personal product presentation.

Add to Project Board

Create a new project board: