Dyer Environmental Controls was chosen to replace an existing smoke system at Robert Gordon University in Aberdeen.

The existing smoke ventilation system in place had problems that had been ongoing for a while. A long-term, reliable solution was needed. The vents are over a large atrium and are therefore very difficult to access from the inside. So a new approach that meant easy access to the vents was required.

Dyer was able to offer an externally mounted waterproof solution to make future maintenance access a lot easier. Dyer supplied and fitted 24 synchronised pairs of externally mounted ZA-BSY+ WS rack and pinion drives. External waterproof connection points were also installed to allow simpe access and futre maintenance. This was technically a very challenging job but Dyer managed to create a bespoke waterproof solution.