Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

SE Controls Launch SHEVTEC®

SE Controls Launch SHEVTEC®

SE Controls is the leading specialist provider of smoke ventilation solutions, with over 25 years experience working with clients through every step of the construction process; from design and installation through to maintenance.

When a fire occurs it takes seconds for smoke to fill an area; it is almost impossible to evacuate to safely through reduced visibility, whilst battling with smoke inhalation.

Smoke ventilation allows the creation of a smoke-free layer above the floor by removing smoke from the area – actuators open high level fresh air inlet vents, allowing cool air into the building which in turn forces out hot air and smoke.

In an unventilated room smoke will rise and gradually spread moving laterally as it reaches the ceiling, it will then be forced back down into the room reducing visibility and escape.

SE Controls has developed SHEVTEC® to offer a complete solution which complies with building regulations and fire engineering requirements. When introduced early on in the design stages, SHEVTEC® can help to provide the most cost efficient, practical and compliant design for any plans.

In 2005, 35,300 fires were recorded in the UK in non-domestic buildings. There were 165 fatalities in England and Wales as a result of the toxic effect of carbon monoxide and other gases, fumes and vapours.

The majority of fire-related deaths and injuries are caused by smoke inhalation with body burns often post mortem – it is therefore imperative to ensure premises has a smoke ventilation system in place.

SHEVTEC® offers a wide range of leading edge smoke heat exhaust ventilation systems designed and tailored to facilitate the client’s requirements and ventilation strategies to meet the structure of the building.

Depending on the structure of the building envelope, adaptive solutions can be provided to meet the design methodology and ventilation strategy. With an extensive product range for any combination of AOV’s, SE Controls provide EN12101-2 certified products to create a comprehensive solution.

Add to Project Board

Create a new project board:


View Environmental Ventilation Product Entry
SE Controls

SE Controls

SE Controls is a leading international specialist in the design and delivery of Smoke Control and Environmental Ventilation systems. Through façade engineering solutions and intelligent automation technology, SE Controls optimises the life-safety...
View company profile
T(01543) 443060
F(01543) 443070
E[email protected]
WVisit SE Controls's website
 Lancaster House, Wellington Cres, Fradley Pk, Lichfield, Staffs, WS13 8RZ

Make an enquiry to SE Controls

You may also be interested in this related Product News: SE Controls launches SECloudlink Read Now