F. Ball and Co. Ltd.’s Styccobond F3 is a water-based rubber/resin flooring adhesive, which is suitable for installing a wide range of textile floorcoverings, including hessian, felt, secondary latex and rubber foam backed carpets, as well as cork tiles up to 3.2mm thick.

Over 50 years since its original launch, Styccobond F3 is still the UK’s most used adhesive for textile floorcoverings.

The adhesive offers excellent wet grab, rapidly builds up a high bond strength and is protected against biodegradation.

It can be applied over Stopgap levelling compounds, structurally sound, smooth, dry subfloors of concrete and sand/cement screed, plywood, flooring grade chipboard and hardboard. It is also suitable for use over normal underfloor heating systems and approved for use in marine flooring installations.

Styccobond F3 is compatible with most carpets and over 70% of the floorcoverings listed in F. Ball’s Recommended Adhesives Guide (RAG), which contractors can consult to check the compatibility of particular adhesives with over 6,000 floorcoverings produced by over 200 manufacturers.

The version guide is available as a free App and an interactive version can be found on the F. Ball website.

For further information on F. Ball and Co. Ltd. Call 01538 361 633, or visit www.f-ball.co.uk