Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

The benefits of using Pantile 2000 for garage buildings

The benefits of using Pantile 2000 for garage buildings

Britmet Lightweight Roofing’s Pantile 2000 system is the only eave to ridge, granulated tile sheet on the market. Available from 1.53m to 8m in length, it’s manufactured to suit your preferred lengths, meaning less wastage, cutting or head lapping.

Pantile 2000 has a cover width of 1040mm allowing for the fastest installation of all lightweight systems. It comes in 6 beautiful colours and can be fixed to a roof pitch as low as 5°. The lowest BBA approved tile sheet in the world.

The Pantile 2000 is available in a 0.9mm gauge, allowing for batten spacing to be extended to 1500mm centres. It’s tek screwed with a colour matching sela-head fastener, giving you a stronger, more secure roof.

The Pantile 2000 is an ideal replacement for old Asbestos roofs, easy to fix, fast to install and vandal proof. It’s great for garages, low pitch roofs and over-roofing low pitch felt roofs.

Installing a tapered batten fixed to the existing structure, increases the height from the existing 3 degrees to 5 degrees. You can lay a breather membrane over the counter battens, and a 38mm x 38mm batten fixed at 1200mm centres.

This easy to fix Pantile 2000 system allows for the existing roofs to remain in place, Saving on expensive decamping costs and removal of the existing roof.

It has an extremely tough and durable roof coating, which is noise resistant and gives an attractive finish. Fully dry fixed and comes with a large range of accessories to finish off any roof.

Add to Project Board

Create a new project board:


Britmet Lightweight Roofing

Britmet Lightweight Roofing

Britmet Lightweight Roofing has one of the widest ranges of lightweight tile and slate-effect roofing systems available on the market today. Its 37,000 square feet, West Midlands based factory produces 7 profiles in 2 thicknesses in a range of...
View company profile
T(01295) 250998
F(01295) 271068
E[email protected]
WVisit Britmet Lightweight Roofing's website
 Spital Farm Offices, Thorpe Mead Ind Est, Banbury, Oxon, OX16 4RZ

Make an enquiry to Britmet Lightweight Roofing

You may also be interested in this related Product News: The Slate 2000 gives Britmet clients a truly traditional slate finish Read Now