Easyflow has designed an underfloor heating system for the ground floor of a Mill Hill-based property comprising of five rooms.
100mm PIR insulation was and EasyFlow then arrived on site to prepare the floor with a polythene separating membrane and a perimeter edging expansion strip before installing the underfloor heating manifold and pipework.
The UFH system was then filled with water and pressure tested before 50mm liquid screed was pumped and installed to the required levels.
Once the heat source is connected and thermostats wired in, Easyflow installers will return to commission the system.
View Underfloor Heating Product Entry View Easyflow brochure PDF