University of York

University of York

Heslington East Campus Student Residences: Sustainable and Efficient Expansion

Goals

Architects Sheppard Robson alongside Graham Construction sought to futureproof accommodation by incorporating multi-use buildings, including catering outlets and social hubs. Key to the brief was using the latest in safety, energy efficiency, longevity, and warranty credentials. Graham Construction’s use of modular external sandwich panels, prefabricated steel bathroom pods, and pre-assembled services distribution racks used Modern Methods of Construction with off-site construction techniques.

Challenges

The major challenge was to specify a roofing system that could keep up with the pace of the build, given the typical building was constructed from start to finish in circa 14 weeks.

The roof deck comprised of precast concrete slabs which facilitated the works programme for speed of construction and consistency in build quality.

Alumasc’s challenge was to find not only a waterproofing solution that was able to keep up with such speed of construction but also to meet a truly sustainable life cycle equalling the lifetime of the building.

A key consideration in the design was the roofing materials’ thermal properties. To meet the u-value target of 0.15, Alumasc’s XPS Plus insulation was specified, providing a single layer of 175mm, which reduced the height of the overall build-up when compared traditional XPS.

Solution

Hydrotech 6125 Waterproofing System / Derbigum Hybrid Upstands

For over half a century Hydrotech Monolithic Membrane has been successfully used by architects and specifiers, ensuring some of the world’s most prestigious buildings and structures are kept watertight. With no product failures in over 50 years and guaranteed waterproofing integrity for the lifetime of the structure, Hydrotech offers a total life cycle solution for the building.

Hydrotech was specified on the main roof areas for this project as it easily meets individual requirements of the buildings. In addition, the system is designed to last the lifetime of the building or structure to which it is applied, giving long-term waterproofing integrity and no future replacement costs.

Applied in a hot liquid state to the deck, and including a polyester reinforcement, the bond of Hydrotech MM6125 is 100% absolute. There is no risk of water tracking below the membrane and because it is monolithic, no possibility of lap failure.

Derbigum Waterproofing

Derbigum sustainable roof system was selected for the upstand areas. This hybrid solution was developed to improve the thermal efficiency in all areas to mitigate against cold-bridging with minimal insulant thickness. Derbigum bituminous membranes are high-performance waterproofing systems offering extended warranties and the highest levels of project support. The upstand zones benefited from Derbigum Mineral which is a mineral surfaced composite reinforced membrane.

Rooftop Management Strategy

In addition to the waterproofing solution the buildings benefit from the full Alumasc rooftop management service. This included the design and supply of safety systems, accessories, and over 20 AOV smoke hatches meeting all British and European standards.

Specific safe zones were designed by Alumasc Roof-Pro and positioned around all roofs for safe access. Purpose made clips for installing lightning conductor tape without roof penetration were also provided. All rooftop accessories are part of the Alumasc Roofing specification and therefore can be found back-to-back within the Alumasc 35-year system warranty.

Project Data

Completion: Autumn 2022

Building Type: Student Accommodation

Product Application: Hydrotech & Derbigum waterproofing systems

Certification: BBA Approved & European Technical Approval

Architect: Sheppard Robson

Main Contractor: Graham Construction

Alumasc Registered Roofing Contractor: Tandragee Roofing

Add to Project Board

Create a new project board:


Alumasc Roofing

Alumasc Roofing is a leading provider of exceptional products and solutions for new build and refurbishment projects.

They have a wealth of experience in dealing with key clients and customers across all building sectors to deliver a...
View company profile
T01744 648400
Einfo@alumascroofing.com
WVisit Alumasc Roofing's website
 White House Works, Bold Road, Sutton, St Helens, Merseyside, WA9 4JG

Make an enquiry to Alumasc Roofing

You may also be interested in this related Case Study: Battersea Power Station Read Now
Subscribe to the Barbour Product Search newsletter