Login
Home / Company News /
Bird Brick Houses answer the most common architect questions [Blog]

Bird Brick Houses answer the most common architect questions [Blog]

Image Gallery

Bird Brick Houses answer the most common architect questions [Blog]

Bird Brick Houses answer the most common architect questions [Blog]

Bird Brick Houses receive more enquiries from architects than any other professional population; with their deep experience of the type of sustainable development issues architects are frequently faced with.

Answers to the most common queries architects have about Bird Brick Houses are set out in the bullet points below:

  • Almost any bricks, metric and imperial can be accommodated, as can most bonds, including Stretcher (half bond), Flemish, English (quarter bond) and Soldier bond.

  • Boxes are manufactured from recycled polypropylene; brick slivers are (normally) cut from the same bricks used in the host wall and bonded to the front of the bird or bat box. The front of the box is retained by four stainless steel screws, however this can be made fixed (non-removable) if preferred.

  • A stainless steel mesh is fitted to the front instead of brick slivers in some cases, for example to ensure good adhesion to stonework or render.

  • In many cases Bird Brick Houses are able to adapt the basic designs to accommodate an architect’s bespoke building design requirements, for example non-standard bricks or a target bird or bat species not in our list.

  • The bird house / bat box is seamless when fitted in the host wall. All Bird Brick Houses boxes are supplied unpointed, so the mortar will match onsite.

  • The fitted bird or bat box is not deep enough to bridge the cavity and will not affect the insulation properties of the building.

  • Being fitted in the non-load bearing outside skin (typically of a cavity wall), no lintel is required, nor any modification to the building design. It is not advised for boxes to be fitted within 750mm of windows or lintels. If fitting clusters of boxes together (mainly swift boxes) it is advised lintels should be fitted.

  • Bird Brick Houses’ design is protected by UK patents and European rights of design.

    • You can view the architects specification under the catalogue section of the Bird Brick House profile.

    Add to Project Board

    Create a new project board:

    View Integral Bird and Bat Box Specification PDF
    Send Enquiry

    Share this Company News

    Email to a friend
    Bird Brick Houses Limited

    Bird Brick Houses Limited

    Bird Brick Houses was formed in 2013 by husband and wife team Duncan and Jenny McCutchan. Duncan’s long experience in the construction business, allied to a shared interest in wildlife was just the breeding ground needed to produce the initial...
    View company profile
    T01323 488732
    Eenquiries@birdbrickhouses.co.uk
    WVisit Bird Brick Houses Limited's website
     Bird Brick Houses Ltd, The Old Parlour, Wilbees Farm, Arlington, East Sussex, BN26 6RU
    Send Enquiry

    Products by this Company

    Categories

    Animal housing Bird control Bricks

    Make an enquiry to

    You may also be interested in this related Company News: Michelmersh embraces ESG target for electrical fleet. Read Now