Fully certified products from the range of TBA FIREFLY™ have been employed to protect a potentially vulnerable roof-space above a doctor’s surgery in Chingford, Essex, ensuring any outbreak of fire could not spread to other parts of the building. The work on the property owned by Peabody Estate has been carried out by Wickford based T & R Fire Protection on behalf of another industry expert, LMAC Fire Systems, also from Essex. The two companies regularly cooperate on such projects as landlords continue to maintain and improve the fire safety performance of existing buildings.

In the case of the Chingford surgery, FIREFLY™ Apollo Lite™ 30:30 was specified along with the manufacturer’s widely utilised Collaroll, High Temperature Adhesive and 12mm stainless steel staples. In addition to protecting the sides of the 2.8 metre high pitched roof-space, creating fire barriers and wrapping multiple beam ends with the Collaroll, T & R also installed one of FIREFLY'S Access Panel FR 120 units. These have been stringently tested against EN 1363-1 2020 and are third party certified by IFC, being shown to achieve an impressive two hours fire resistance from either side of a fire compartment. Intended to be fitted vertically, the heavy-duty construction of the Zintec steel door and unistrut frame ensures the assembly offers a tight and flush fit when closed, and robust performance in use.

The Director for T & R Fire Protection, Tom, commented: “We’ve used APOLLO Lite™ and other FIREFLY™ products on many hundreds of projects in the past, FIREFLY™ is our ‘go to’ manufacturer when it comes to fire compartmentation. There are many older properties which have no fire compartmentation in their roof spaces and in the case of the Chingford doctor’s surgery, the landlord – Peabody – asked us to carry out an inspection and come up with a fire strategy. We base our recommendations and design drawings on FIREFLY'S standard details and, once they’ve been approved go in and install the fire barriers. The work involves breaking the loft-space down into a number of compartments with one of the Firefly access panels providing safe passage between them. The installation has gone very well, though there is a lot more of this type of work to be done across the country in many sectors.”

The APOLLO Lite™ 30:30 has been developed for use in vertical separation or compartmentation situations, offering 30 minutes integrity and insulation and is straightforward to install for an experienced contractor. It is widely specified to form fire barriers within roof voids and floor voids in many different property types, including multi-storey flats and commercial premises.