Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Restraint Straps

BPC Building Products Ltd

Heavy Duty Resistant Strap
Heavy duty restraint straps are suitable for horizontal restraint applications such as tying timber roofs and floors into masonry walls. Galvanised straps are manufactured from hot dipped galvanised steel to BS EN 10346 :2009 + G275. Stainless steel straps are available to order. Designed in accordance with The Building Regulations, BS5268 Part 3 and other building standards for vertical and horizontal restraint. Multi holed at 25mm offset centres, restraint straps should be fixed using either 50mm long no. 12 woodscrews (using wall plugs in masonry for vertical restraint) or 75mm x 4.0mm diameter galvanised nails into timber. Stainless steel screws or nails must be used when fixing stainless steel straps. Restraint straps are available as galvanised or stainless steel and are supplied in packs:

  • Horizontal heavy gauge (10 per pack)
  • Vertical light gauge (20 per pack)

Light Duty Restraint Strap
Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. Galvanised straps are manufactured from hot dipped galvanised steel to BS EN 10346 :2009 +G275. Stainless steel straps are available to order. Designed in accordance with The Building Regulations, BS5268 Part 3 and other building standards for vertical and horizontal restraint. Multi holed at 25mm offset centres, restraint straps should be fixed using either 50mm long no. 12 woodscrews (using wall plugs in masonry for vertical restraint) or 75mm x 4.0mm diameter galvanised nails into timber. Stainless steel screws or nails must be used when fixing stainless steel straps.

PWS Party Wall Strap
Manufactured from 30 x 2.5mm galvanised steel to BS EN 10346:2009 DX51D + G275 party wall straps are multi holed at 25mm centres.

Heavy Duty Timber Frame Strap
Timber frame holding down straps are produced from galvanised steel to BS EN 10346 : 2009 (G275), or stainless steel grade 304 austenitic to BS EN 10088-2 Grade 1.4301, multi holed at 25mm centres. Standard overall length is 900mm, bent at 75mm to tie into brickwork, and cranked at 300 mm to suit 50mm cavity.

Endorsements

Be the first to endorse this product.

Add to Project Board

Create a new project board:

Catalogues

BPC Building Products Ltd

BPC Building Products Ltd

BPC Building Products is a manufacturer of a wide range of timber-fixing components and builders' metalwork. The company has been supplying the UK construction industry through a network of merchants and distributors since 1977, giving us over 35...
View company profile

Other Products