Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Saint-Gobain PAM launch new pre-assembly service for Ensign system

Saint-Gobain PAM launch new pre-assembly service for Ensign system

Saint-Gobain PAM have launched a new pre-assembly service for the Ensign cast iron above ground drainage system. The service offers much more than just pre-assembly. Saint-Gobain break down the many benefits of the system below.

The Service
Stage 1 - Early Collaboration
The PAM regional technical sales managers will engage with you at the very early stages of the project to evaluate the possibilities and benefits of going down a pre-assembly install route. Through early collaboration the team can identify any unique requirements before taking any early design drawings for take-off estimation.

Stage 2 – Estimation
PAM has devised a standard list of stack arrangements in 100mmm diameter which will assist the technical team in calculating an initial take-off estimate from the design drawings provided.

Stage 3 - Stack designs approval
PAM will provide detailed CAD drawings and 3D models of the stack arrangements for site approval utilising the latest digital technology. The stacks are fully compliant with BS EN 12056 Part 2 ensuring all soil stack branches are swept radius in accordance with the guidelines.

Stage 4 - Simplified ordering through the merchant
The PAM pre-assembly stacks are set up with a standard product code and price list and therefore are ordered in the same way as standard individual Ensign components, through the merchant distributor.

Stage 5 – Assembly and air test
The ordered stack arrangements are then assembled in a purpose made stillage at the PAM manufacturing site in Telford. When each stack is fully assembled it is air pressure tested as standard to 0.5 bar for 5 mins in accordance with BS EN 12056. The stacks are then labelled with the relevant location reference and floor level in accordance with the drawings.

Stage 6 – Logistics
The unique stillage’s are designed to restrict movement during transportation of the stack assemblies to the project site. The stillage design also allows for easy off-load via fork lift or hoist and have wheels fitted to facilitate movement around the site and to manoeuvre to install locations.

Stage 7 - Flexibility on site
The PAM pre-assembly soil stacks are initially based around 1.7m in length in many arrangements designed to facilitate a one-man lift operation. To fully connect each floor a 100mm soil pipe is cut on site which allows flexibility for any site variances ensuring total accuracy and minimise any waste.

Stage 8 – Installation support
The PAM team will liaise with stakeholders throughout the project providing guidance and support to ensure a smooth installation.

Cast iron – the sustainable choice
• Recycling economy and Longevity - Cast iron is manufactured from c.98% recycled content. Ensign is 100% recyclable.
• The Ensign cast iron system has a life span of c.70 years

PAM Pre-assembled stacks offer:
• Reduced pipe cutting on site
• Greater accuracy that minimises wastage
• No surplus product delivered
• Stillage’s that provide safe site storage until installed.

For more information and to discuss your next project contact:
• Your regional technical sales manager
• PAM technical team: 01952 262529 email: [email protected]

PAM pre-assembled stack solutions

On-site benefits
• Reduces on-site installation time by up to 60%, therefore reducing on-site labour costs.
• All stacks are air tested at the factory as standard prior to dispatch
• Stacks supplied in purpose made stillage’s for robust storage and for maneuvering stacks into install location.
• Minimal on-site wastage: No surplus products ordered and reduced pipe cutting.
• Cast iron flexibility: Connecting pipe between floors cut on site to allow for on-site variances

Design benefits
• Early collaboration ensures optimised stack designs offering the best solutions
• CAD / 3D models provided for approval
• Greater level of accuracy and cost management
• Designed for one-man handling capability

Material Benefits
• Cast iron Pre-assembly stacks are fire rated the safest level possible A1
• Acoustically cast iron is the quietest material on the market
• Flexible couplings with high speed assembly: The stainless steel rapid coupling is nearly 3 times quicker than fusion welded joints in HDPE - (Luckins labour times)
• No concern about expansion. Cast iron will remain

Add to Project Board

Create a new project board:


Saint-Gobain PAM

Saint-Gobain PAM

Saint-Gobain PAM UK specialises in the manufacture of cast iron above and below ground drainage systems, and traditional cast iron rainwater and gutter systems.

The company offers unrivalled technical support, a total solution approach and...
View company profile
T(0115) 930 5000
 (01952) 262529 Tech Dept.
F(0115) 932 9513
E[email protected]
WVisit Saint-Gobain PAM's website
 Lows Lane, Stanton-by-Dale, Ilkeston, Derbyshire, DE7 4QU

Make an enquiry to Saint-Gobain PAM

You may also be interested in this related Product News: New Rodding Branch developed to reduce installation times Read Now