Sustainable Building Envelope [Blog]

Sustainable Building Envelope [Blog]

A blog written by GCP Applied Technologies

Sustainable design creates buildings that are beautiful and functional, with improved social and environmental performance, while saving money through more efficient use of energy and materials. Sustainable buildings safeguard human health and safety; minimise negative environmental impacts; exhibit resilience during severe weather; and extend the structure’s useful life.

Understanding gas vapour remediation

Developers are increasingly facing the challenge of protecting new structures from harmful gases in the soil. Even when layers of soil are removed from industrial sites and other brownfields, gas barrier protection is often still needed because a certain amount of vapours remain that may be harmful to human health.

Emerging standards to protect against methane and other gases

In the UK, standards such as BS8485:2015 have already been developed that provide guidance for site investigations and to identify acceptable levels of methane gas and carbon dioxide in the soil.

In addition, the City of Los Angeles has adopted Ordinance 175790, which states in part that building permits within certain “methane zones” will not be issued until the submittal of detailed plans for the installation of suitable methane mitigation systems. We are likely to see similar regulations emerge in other locations in the coming years.

Protective measures against harmful gases

Certain waterproofing systems such as PREPRUFE® Plus system offer not only water and moisture protection but also protection from gases such as methane, carbon dioxide, and radon. This type of system is applied below ground, prior to the pouring of the concrete and is highly effective and efficient as it provides the dual benefit of waterproofing and gas protection in a single layer.

As the concrete is poured, it passes through the surface layer of the PREPRUFE® Plus membrane. The concrete then engages with the membrane’s pressure sensitive adhesive. As the concrete hardens, the bond between the concrete and the membrane become permanent. By creating an integral bond with poured concrete, the waterproofing membrane provides a barrier to water, moisture, and gas.

Pre-applied bonded membranes are usually the most cost-effective way to minimise the amount of gases that enter the structure. In the absence of this type of membrane, builders typically are forced to vent in layers and add granular fill below the slab so that the gases can freely escape the structure. This is a time-consuming and expensive endeavour.

Evaluating options for vapour gas barriers

Before specifying a water and gas barrier, talk with engineers, environmental professionals, and local environmental officials who are well versed in the latest remediation techniques and regulations. Also, be sure to investigate what tests have been done to validate the manufacturer’s claims about the gas remediation performance of their products.

It’s essential that the product(s) are able to mitigate gases below the threshold designated by local environmental regulations. These regulations will vary from country to country, and sometimes even vary by state.

Learn more about PREPRUFE® Plus waterproofing membrane

Add to Project Board

Create a new project board:

GCP Applied Technologies

GCP Applied Technologies

GCP Applied Technologies products are specified by architects and engineers and are used by contractors, ready mix, precast and block producers, cement manufacturers to enhance the durability, strength and appearance of structures found in many major...
View company profile

Make an enquiry to GCP Applied Technologies

You may also be interested in this related Product News: Wykamol Launch New Mould Control Brochure Read Now