Barbour Product Search is part of the Informa Intelligence Division of Informa PLC

This site is operated by a business or businesses owned by Informa PLC and all copyright resides with them. Informa PLC's registered office is 5 Howick Place, London SW1P 1WG. Registered in England and Wales. Number 8860726.

Spectus provide Flush Tilt and Turn windows for Waterfront 3, Edinburgh

Spectus provide Flush Tilt and Turn windows for Waterfront 3, Edinburgh

Approved Spectus fabricator Sidey supplied and installed over 200 Flush Tilt and Turn windows for a low-rise apartment block that forms part of Places for People’s Waterfront 3 development in Edinburgh.

Designed by Reiach and Hall Architects, this contemporary project provided 34 homes for affordable rent, built using a mix of traditional and timber-framed modular construction.

Waterfront 3 is the third phase of a high density development. The wider development provides a total of 89 mixed-tenure homes across a 0.9 hectare site.

Mixing traditional and MMC

Mike Rutland, business development manager at ModularWise, said: “This was a fairly unusual development in that it mixed traditional build with modular. The ground floor of the scheme was built using traditional construction methods and consists of seven apartments, while the upper three floors consist of 27 modular apartments.

“The groundworks and foundations of the building were completed as normal, the construction company, Allenbuild, then built the traditionally constructed ground floor.

“While this work was going on, we were fabricating the modules for the upper floors in our factory in Knighton, Powys, Mid-Wales. The modules are precision engineered, volumetric (three dimensional) timber framed structures, which include all fixtures and fittings, including windows, kitchens and bathrooms, and are fully decorated before leaving the factory.

“Factory manufacturing can offer a range of advantages over traditional construction. The quality of the build is much better as construction occurs in a controlled environment rather than out in the elements. This means that the costs of remedial work due to poor quality construction are practically negated. Also, wastage is significantly reduced; typically on site you would expect 19% of materials to end up in landfill, whereas in our factory we can get that down to around 1.5%.”

Flush Tilt and Turn – modern and high performance

Mike said: “The Spectus flush tilt and turn windows were chosen for the project because they combine contemporary looks and large aperture with high performance, including low U-values of 1.4.

“We took full advantage of the Spectus design service, which includes wind and barrier loading, ventilation and acoustic requirements.

“Spectus Window System’s SER certification provides evidence that the glazing meets the relevant structural integrity codes of practice, which we needed for the warrant stage. Their expertise makes the process so much smoother.

“The Sidey team was very flexible and were happy to install the windows of the traditionally built ground floor on site, and the rest to the modules in our factory in Wales.”

Time and cost savings

Mike continued: “Once the traditionally constructed ground floor was completed, the modules were transported to site by lorry and delivered a floor at a time. The landing sequence was completed over a four week period – a significant time saving versus traditional construction.

“On site, connector plates were fitted at the external ‘roofs’ of the modules, and angle steel connectors were fitted at the corners of the modules to connect modules, so that they ultimately act as one homogenous building.

“The only additional works required after the modules were put into position, was the erection and fitting of steel walkways, and the installation of the lifts and external cladding.

“Because manufacturing occurs before and during groundworks on site, significant time savings are made in construction, which translates into cost savings for the client.

“To ensure cost savings are made, one area that requires careful planning is in the transportation of modules from factory to site. Consideration needs to be given to module size in the design process so that lorries don’t require costly police escorts.”

The need for third party certification

Mike said: “It’s crucial for us to work with suppliers who offer quality products, including relevant industry certification, which not only ensures a quality finish and high performance, but which enable us to meet the requirements for warranty and finance.”

A successful development

Mike concluded: “Spectus Window Systems are a pleasure to work with and we look forward to working with them on future developments.

“Our client, Places for People, is extremely pleased with the project which will provide much needed quality affordable housing for the people of Edinburgh.”

Add to Project Board

Create a new project board:


View Flush Tilt & Turn Product Entry
Spectus Window Systems

Spectus Window Systems

Dedicated to the Commercial build sector, Spectus Window Systems combines the best technical knowledge with state of the art machinery and advanced material handling equipment, to ensure consistent production of the highest quality product. Spectus...
View company profile
T01952 283377
F01952 283350
E[email protected]
WVisit Spectus Window Systems's website
 Stafford Park 6, Telford, Shropshire, TF3 3AT

Make an enquiry to Spectus Window Systems

You may also be interested in this related Case Study: Spectus Elite 70 windows specified for affordable housing scheme Read Now