Radiator Valves
Altecnic Ltd – Caleffi Group
ECOCAL™ THERMOSTATIC RADIATOR VALVES
Thermostatic valves are typically used for regulating the water flow to the radiators of central heating systems.
A thermal regulating element automatically controls the opening of the valve to keep the ambient temperature of the room where they are installed constant at the set value.
This prevents unwanted temperature changes and achieves energy savings by keeping the temperature constant.
More information: https://www.altecnic.co.uk/ecocal-thermostatic-radiator-valves
ECOCAL™ TWIN PACKS
The Altecnic range of radiator valves are of durable construction giving dependable performance for building services and domestic applications.
Their aesthetic design satisfies the requirements of modern commercial buildings and domestic interiors.
Chrome plated bodies with white thermostatic controllers and lockshield covers give an unobtrusive appearance and complements most decors.
For more stylistic modern decors valves are available with chrome finish thermostatic controllers and lockshield covers.
The inlet connection of the valve body is either compression or push fit for use with copper tube. Supplied with manual cap for stem protection and manual isolation.
Altecnic thermostatic radiator valves are BS EN 215 certified.
More information: https://www.altecnic.co.uk/ecocal-trv-twin-pack-angled
DYNAMICAL® TWIN PACK
The DYNAMICAL® thermostatic radiator valves allows the automatic dynamic balancing and pressure-independent adjustment of the thermal medium in the radiators of two-pipe heating systems.
The device, in conjunction with a thermostatic, electronic or thermo-electric controller, combines different functions into a single component.
The use of dynamic thermostatic valves in combination with thermostatic control heads makes it possible to keep the ambient temperature constant, at the set value, in the room where they are installed, thus guaranteeing effective energy saving.
More information: https://www.altecnic.co.uk/dynamical%C2%AE%20twin%20pack
COMMERCIAL PRE-SETTABLE THERMOSTATIC RADIATOR VALVE
The Altecnic range of pre-settable radiator valves are suitable for use with the ecocal manual handwheel operator or thermostatic controller.
They are used to control the room temperature by regulating the flow of hot water into the radiator or other heat emitter.
More information: https://www.altecnic.co.uk/commercial-pre-settable-thermostatic-radiator-valve
COMMERCIAL THERMOSTATIC RADIATOR VALVES - NON-REVERSIBLE
The Altecnic commercial radiator valve range can be used with a thermostatic controller or a manual operator.
Thermostatic radiator valves are typically used for regulating the flow to radiators of central heating systems. They can also be used with a remote sensor to control the flow to heated ceilings and fancoils. The thermostatic controller contains a liquid filled element which automatically controls the opening of the valve to keep the ambient temperature of the room at the set temperature. This prevents temperature fluctuations in the room and achieves considerable energy savings. Their aesthetic design satisfies the requirements of modern commercial
buildings.
With chrome plated bodies and white controllers they match other valves in the Altecnic range and give an unobtrusive appearance and complements most decors.
More information: https://altecnic.co.uk/commercial-thermostatic-radiator-valves-non-reversible
DUAL FUEL POLISHED RADIATOR VALVES
The wheelhead valve has the facility to allow an electric heater to pass through the valve into the vertical leg of a towel rail. When this is connected to an electricity supply it allows the towel rail to be heated when the central heating boiler is switched off, for example in summer.
More information: https://www.altecnic.co.uk/dual-fuel-polished-radiator-valves
SQUARE HEAD RADIATOR VALVE
The Altecnic square polished radiator valves are of durable construction giving dependable performance on domestic applications and in particular in bath and shower rooms. Their smooth polished chrome finish and easy clean design makes them ideally suitable for use with towel rails and radiators in bath and shower rooms.
The polished chrome finish compliments white, chrome and other modern coloured towel rails and radiators. The valves can also be used to provide isolation and regulation on radiators in other rooms with a more stylistic modern decor. The inlet connection to both valves is 15 mm compression to BS EN 1254, for use with half hard R250 copper tube to BS EN 1057, and the outlet connection is a union tailpipe with ½” external pipe thread to BS EN ISO 228.
More information: https://www.altecnic.co.uk/square-head-radiator-valve
