Thermostatic Mixing Valve
Altecnic Ltd – Caleffi Group
MERCHANT MIXING VALVE - SERIES 5213
The failsafe merchant thermostatic mixing valve has been specifically designed and manufactured to meet the requirements of the latest National Health Service model engineering specification - D08 and BS 7942 for use in vulnerable person applications. Approved to EN1287:2017 and EN1111:2017 and therefore suitable for domestic applications in compliance with Part G of the Building Regulations.
More information: https://www.altecnic.co.uk/merchant-mixing-valve-series-5213
45-65° TEMPERING VALVE - SERIES 5218
A tempering valve is used in systems where the water in the storage cylinder can reach temperatures significantly above 60°C. In the event of failure of the hot or cold water supplies the tempering valve will automatically shut down in line with the BS EN 15092 test standard.
More information: https://www.altecnic.co.uk/45-65-degree-tempering-valve-series-5218
MIXCAL CAREFLO PLUS® THERMOSTATIC MIXING VALVE - SERIES 5213+
The Mixcal Careflo Plus® failsafe thermostatic mixing valves have been designed and manufactured to meet the requirements of BS 7942:2011.
This valve has a unique feature which allows for thermal disinfection to be performed through to the outlets, helping to protect against Legionella and other microbial organisms. The 101-3001 has a universal tailpiece and adapter and 101-3002 comes complete with universal MX ends with adapter.
More information: https://www.altecnic.co.uk/mixcal-careflo-plusr
MIXCAL III GROUP THERMOSTATIC MIXING VALVE - SERIES 5219
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The mixcal III group thermostatic mixing valve has been designed especially for centralised systems which demand high flow rates, for example with multiple outlets such as shower and wash basins.
More information: https://www.altecnic.co.uk/mixcal-3-group-tmv-art-5219-check-valves
MIXCAL MIXPRO® THERMOSTATIC MIXING VALVES - SERIES 5231
Thermostatic mixing valves are used to maintain the domestic hot water supplied to the user at a constant and safe temperature, when variations in the hot and cold water supply conditions and draw off flow rates occur.
The 5231 range has been designed especially for centralised systems which demand high flow rates, for example with multiple outlets such as shower and wash basins.
More information: https://www.altecnic.co.uk/mixcal-mixpro-thermostatic-mixing-valves-series-5231
LEGIOMIX® 2.0 6000 SERIES - HYBRID ELECTRONIC MIXING VALVE
The electronic hybrid mixing valve combines the typical function of the mechanical thermostatic mixing valve and the management efficiency of an electronic mixing valve in a single device.
The thermostatic mixing valve responds promptly to any variation in temperature, pressure and inlet flow rate to quickly restore the mixed water temperature to the outlet.
This standard mixing valve is effectively handled by a motorised actuator that, under the control of a specific regulator, changes the mixed water temperature set position.
More information: https://www.altecnic.co.uk/legiomix-2-6000-series-hybrid-electronic-mixing-valve
