Choosing Ladders For Safe Rooftop Access

Choosing Ladders For Safe Rooftop Access

According to recent figures from the Health and Safety Executive (HSE), falls from height accounted for 44% of all non-fatal injuries and 25% of all fatal injuries over the last five years. Here, Tom Brandon, Specification Sales Manager at Bilco UK, discusses why adopting a bespoke approach to roof access can ensure the highest level of safety, suitability and compliance.

When specifying a ladder to facilitate roof access, it is important to ensure you are choosing the correct system to meet your project's specific requirements. This includes identifying the reason for access to the roof and the frequency of access required.

It is crucial to determine whether tools and equipment will need to be transferred through the access hatch, or solely roofing professionals. This will provide clarification on where the ladder will need to be mounted. It will also highlight whether any additional safety measures will be required to maintain individuals’ safety when using the ladder, such as the addition of a safety cage or guard rail.

Once the reason for requiring safe access to the roof is established, an informed choice can be made regarding which roof access hatch and corresponding ladder system are best suited for the needs of a project.

The right ladder for the right application
If access to the roof is required on a regular basis, for professionals who need to transfer tools and equipment, a Companionway Roof Access Hatch would be required. This is used in conjunction with a Companionway Ladder, which is a 75-degree incline ladder with handrails that makes it easier for the user to gain access to the roof. When larger tools and equipment are being used, a Fixed Staircase Roof Access Hatch, also known as a Service Stair Roof Access Hatch, would be specified. This is a larger elongated access hatch, which should be specified in conjunction with a permanent staircase to provide permanent access to a roof hatch of up to 2440mm or 3360mm in length as standard available sizes.

Other ladder types are available depending on the application and access required. Due to their small footprint, industrial vertical fixed ladders are always recommended for use in conjunction with smoke vents. They ensure there is no hindrance to the flow of smoke through the vent to meet the minimum 1 metre squared free vent area required by the regulations.
If the floor space must be kept clean and tidy at all times, for example, within schools and hospitals, a retractable ladder would be ideal where a larger roof access hatch of up to 1500mm is installed.

Special ladder applications
For commercial projects that require more complex specifications, contractors should collaborate with manufacturers to create bespoke ladder applications that safely and securely fulfil roof access requirements. Bilco UK’s in-house design and engineering teams work closely with roofing contractors to manufacture special ladder applications that are custom-made to meet the project's specific requirements.

For example, if a ladder has a reach over 10 metres is installed onto the exterior of a building, for escape or maintenance, a series of fixed vertical ladders split by railed platforms every 6 metres would be required to ensure safety and compliance. The installation would require the addition of a safety cage and handrails in order to maintain the safety of contractors when gaining roof access.

Maintaining floor space and ensuring walkways are kept clear is a common challenge when choosing ladders for roof access. This is why fixed vertical retractable ladders, where the lower section of the ladder can be retracted when not required, is a popular and convenient choice. A detachable version is also available where the bottom section of the ladder can be removed completely and installed again when needed. Other alternatives that ensure ladder access security is maintained is the use of the hook on, hinged ladder gates, or magnetic locking ladder gates.

Rooftop Access
When contractors need to travel across the roof for maintenance and access reasons, it can be a challenge to navigate the roof safely if there are potential trip hazards such as wires and ducting. Bilco UK manufactures a range of aluminium stepover ladders that can be seamlessly fitted over obstructions. These provide a stable hand-railed platform that enables individuals to get from one area of the roof to another safely and quickly. As the stepovers feature weighted big foots it eliminates any requirement for roof penetration, therefore avoiding any risk of leaks or drafts. Stepovers can be installed with either companionway steps or fixed vertical steps, depending on the available space on the roof.

There are a range of ladder options available to roofing professionals to achieve safe and secure access to the roof area and it is crucial to work with a manufacturer from the initial design stages. Doing so will ensure the installation provides the highest standards of safety and compliance for the entire lifecycle of the building.

For further information on Bilco UK’s complete range of roof access solutions, call 01284 701696.

For advice on how to specify the correct ladder, read Bilco UK’s article on Specifying Ladders.

Add to Project Board

Create a new project board:

Bilco UK

Bilco UK

Established in America in 1926, Bilco has designed and manufactured access products for construction and engineering industries across the world.

In 1989, Bilco UK was set up to supply a comprehensive range of roof hatches, smoke vents,...
View company profile
T01284 701 696
 01284 701696 Tech Dept.
F01284 702 531
WVisit Bilco UK's website
 Fornham Business Court, Hall Farm, Fornham St. Martin, Bury St. Edmunds, Suffolk, IP31 1SL


Access solutions Safety Security Access ladders Gates Handrails Ladders

Show all categories

Make an enquiry to Bilco UK

You may also be interested in this related Product News: The Gartec 6000, is now the Aritco HomeLift Read Now