Floor Screeds and Wearing Screeds
Mapei (UK)
Topcem Pronton
Ready to use, pre-packed mortar for normal setting, fast drying screeds with controlled shrinkage. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs, interior or exterior use. Topcem Pronto needs mixing with water. Install ceramic tiles after just 24 hours and stone material after 2 days.
Mapecem
Fast-setting and drying (24 hours) hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs. Particularly suitable where fast-drying is required for minimum downtime. Install ceramic and natural stone tiles after just 3 hours.
Mapecem Pronton
Pre-blended, ready to use, fast-setting and drying hydraulic binder for shrinkage compensated screeds. For the formation of bonded, un-bonded, floating and heated screeds on existing and new slabs internal or external. Mapecem Pronto just needs mixing with water. Particularly suitable where fast-drying is required for minimum downtime. Ultratop Industrial an Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40mm.
Ultratop Industrial
May remain on view as a finished floor surface due to its high mechanical strength, and is used specifically for internal industrial buildings. The product is used for levelling or smoothing new or existing concrete and screed substrates, to make them suitable for industrial use for example, in workshops, factories, store rooms, plant rooms, garages and warehouses. It is a natural finish product.
The product is available in grey– suitable for industrial use only. If high chemical resistance is required, after only 24-36 hours of applying Ultratop Industrial, the surface may be coated with Mapefloor Systems.
Ultratop Loft F
One-component trowellable coarse-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect. Ultratop Loft W is a One-component trowellable fine-textured cementitious paste applied in layers up to 2 mm thick to create decorative floors with a trowelled or mottled effect.
